晚上好!  欢迎浏览本公司网页  专业提供原装测试耗材,价格优惠,欢迎咨询! 瑞士EMPA,德国BAM、VSM,英国James、SDC,美国AATCC、Testfabrics ...
 搜索产品   
   热门搜索:  SATRA 测试相关   Taber 产品   EMPA 产品   BAM 产品
检测仪器设备 测试耗材配件 技术咨询服务   Test Equipments and Test Materials
 【首页】   【产品中心】   【资料中心】   【服务中心】   【联系我们】  业务代表 林S:(0)15820869812, 0769-2201 2232, QQ:195552614, Email: lin@ydtest.com
 
产 品 目 录 (163)
 
产 品 目 录
     
  
  
相关产品(Taber H)

TABER CS-5耐磨橡皮CS-5羊毛毡
11-TABER CS-5 FELT


Taber 耐磨 磨轮 砂轮  H-38
11-W Taber H-38


Taber 耐磨 磨轮 砂轮 H-22
11-W Taber H-22


Taber 耐磨 磨轮 砂轮  CS-17
11-W Taber CS-17


Taber 耐磨 磨轮 砂轮  CS-10
11-W Taber CS-10

相关资料(Taber H)

=====暂没找到相关文件资料=====
 
      全部产品      测试耗材      Taber 美国原装     浏览产品信息:
产品代号: 11-W Taber H-18
产品名称: Taber 耐磨 磨轮 砂轮 H-18

产品价格: 欢迎询价¥ , 2个 / 盒
品牌产地: 美国 Taber
产品规格: 每盒2个,分左右, 宽 12.7±0.1mm  直径 51.7mm

产品简介: Taber耐磨测试用耗材- 美国Taber 磨耗轮 砂轮
H 系列 H-10 H-18 H-22 H-38;
CS 系列 CS-5 CS-10 CS-10F CS-10P CS-10W CS-17;
S 系列 S-32(CS-0)S-35 S-39 S-42 S-33

更新时间: 2017-9-6
浏览次数: 2795



产品描述:  


规格:每盒两个,分左、右两个,宽 12.7±0.1mm 直径 51.7mm
砂纸规格:12.7mm x 160mm 180号 360号
产地:美国 Taber , 又称 Taber 耐磨 砂轮 磨轮,(测试砂纸条)

Taber磨耗轮有5等磨料,可适用各行业多种材料试验要求。如:羊毛毯或橡胶轮用于测精细的或磨耗性的材料,如牙科粉末等;含磨耗粒子的弹性橡胶或陶瓷硬化结构的磨耗轮适于刚性材料。

选择磨耗轮应基于被测材料实际受磨损状况,磨耗轮磨粒分五种类型:
1、Calbrase®:橡胶和氧化铝磨粒弹性磨耗;
2、Calibrade®:陶瓷、碳化硅磨粒非弹性轮;
3、羊毛毯:无磨粒;
4、橡胶:无磨粒,除非与砂纸同用;
5、碳化钨:螺纹牙切撕运动,用于弹性材料如橡胶、皮革或地板垫等。

一般情况下Calibrade磨擦轮用于测试柔性样件,Calibrase用于测较硬的样件。

Taber 磨耗测试过程:
将待测材料放在Taber 磨耗试验机的转盘上,两个磨耗轮以一定压力压在材料上使其受磨耗。磨耗轮随样件盘转动面转动,产生相对运动和磨耗,而转动过程中磨耗轮轴相对于转盘转轴的偏移产生滑移运动,从而磨耗材料。











H-10 - #125323
Calibrade abrasive wheels - non-resilient; gray; fine abrasive; includes left and right wheels (1 pr.). Used to evaluate materials such as steel and other ferrous alloys.
H-18 - #125324
Calibrade abrasive wheels - non-resilient; gray; medium abrasive; includes left and right wheels (1 pr.). Recommended for testing leather, rubber, woven textile fabrics, coated fabrics, flexible plastic sheet, and other soft resilient materials.
H-22 - #125325
Calibrade abrasive wheels - non-resilient; gray; coarse abrasive; includes left and right wheels (1 pr.). Used to evaluate rubber, linoleum, leather, deep pile fabrics, and concrete.
H-38 - #125326
Calibrade abrasive wheels - non-resilient; tan; very fine abrasive; includes left and right wheels (1 pr.). Principle use is for woven fabrics or delicate textiles.
CS-10 - #125320
Calibrase abrasive wheels - resilient; green; mild to medium abrading action; includes left and right wheels (1 pr.). Popular wheel used to evaluate resistance of wear on materials such as coatings, textiles, and leather products.
CS-10F - #125321
Calibrase abrasive wheels - resilient; brown; mild abrading action; includes left and right wheels (1 pr.). Used to evaluate resistance of transparent materials to haze (reface with ST-11 Refacing Stone, use oversize vacuum pickup).
CS-10P - #132684
Calibrase abrasive wheel set for - resilient; green; mild to medium abrading action; includes left and right wheels (1 pr.). Specifically designed to evaluate fibrous materials such as paper and paperboard. Similar to CS-10 but wheel faces do not load.
CS-10W - #130950
Calibrase abrasive wheels - resilient; white; mild to medium abrading action; includes left and right wheels (1 pr.). Same as CS-10, but no colorant added.
CS-17 - #125322
Calibrase abrasive wheels - resilient; green; medium - coarse abrading action; includes left and right wheels (1 pr.). Used to test anodized aluminum, ceramics, plastics, and enamels.
CS-T3 - #132661
Calibrase abrasive wheels - resilient; red; mild abrading action; includes left and right wheels (1 pr.). NOTE: Previously sold as CS-10F (type III), recommended to reface with ST-11 Refacing Stone.
CS-5 - #125319
Felt wheel set - resilient; densely compacted wool felt; white [no abrasive]; includes left and right wheels (1 pr.). Principal use is in testing textile fabrics to evaluate one fibrous material rubbing against another.
CS-0 - #125344
Calibrase wheel set - resilient; black rubber [no abrasive]; includes left and right wheels (1 pr.). Mount S-33 or S-42 sandpaper strips to periphery of this wheel or use by themselves for very mild abrasive action and/or wet tests. [Note, this is the same as NEMA S-32.]
S-35 - #125345
Tungsten Carbide wheel set - tungsten carbide; with 1 mm pitch x 45° spiral pitch angle, helical teeth cut into its periphery ; includes left and right wheels (1 pr.). Produces very severe cutting and tearing action, use only on resilient materials. [Note: image shows protective covering on helical teeth]
S-39 - #125529
Leather clad wheel set - leather strip mounted to brass hub; includes left and right wheels (1 pr.). Use in conjunction with Grit Feeder.
S-42 (100 pcs.) - #125564 S-42 (500 pcs.) - #132403
The S-42 sandpaper strip includes a pressure sensitive adhesive so that it can be applied to the outer periphery of CS-0 wheels. Each strip is 12.7mm x 160mm, 180 ANSI-CAMI, open coat (100 pcs. / 500 pcs.).
S-33 (100 pcs.) - #121124 S-33 (500 pcs.) - #132495
The S-33 sandpaper strip includes a pressure sensitive adhesive so that it can be applied to the outer periphery of CS-0 wheels. Each strip is 12.7mm x 160mm, 360 FEPA, closed coat (100 pcs. / 500 pcs.).
 
  • 标准测试耗材:100% 原装产品、价格满意、可时效配合
  • 所有产品资讯:100% 质量过关、跟进改良、可找到所需
  • 所有技术服务:100% 免费咨询、随时解答、可维修校准
  •  产品:您要什么产品? 找我们帮忙。专业提供实验室、检测校准、计量研发所使用仪器、测试耗材配件
  •  价格:您在为比价发愁? 告诉我们您的可接受价格, 一切皆有可能... 最优价格成交...
  •  维修:仪器机台故障、坏了, 供应商维修报价高。 找我们, 也许很简单就搞定了, 多一个选择
  • 电话:+86 (0)769 2201 2232   传真:+86 (0)769 2201 2232    在线QQ:195552614
    广东省东莞市东城区    Email:yd#ydtest.com
    Powered By YDTEST.COM Copyright©   YUDA All Rights Reserved.
       粤ICP备09029704号-1
    Visitors: 1809349-81912414-1

    您当前IP为:34.237.140.238