Description:
The ASKER Durometer Type C, produced since 1956, is our original brand durometer, and is a de facto standard in the world for the measurement of soft rubber, urethane foam, sponge, rolled-threads, film rolls and pottery clay, footwear.
Widely used for measuring soft rubber, sponges, and other foam elastomers, as well as rolled-threads, -films and textile windings (yarn packages).
The Pressure foot in contact with the specimen is 44mm in width and 18mm in depth, wide enough to ensure accurate measurement. The Longer Pressure Foot Type (C1L type)is applicable for measurement of narrow or concave specimens.
Type A Durometer (ASKER A type), conforming to JIS K 6235 is the most popular type of durometer for measuring rubber hardness.
However, verification is recommended because a significant difference is estimated to be the largest when a durometer indicates measurement values from 10 to 90 points.
For hard specimens for which Type A Durometer readings indicate more than 90 points, measurements should be undertaken using the Type D Durometer (ASKER D type). However, for soft specimens with measurements of less than 20 points, the ASKER C type or Type E Durometer (ASKER E type) should be used. The most important consideration in using durometers is to select the correct type for purposes of measurement according to the specimen.
|
热门搜索： 
产品：您要什么产品? 找我们帮忙。专业提供实验室、检测校准、计量研发所使用仪器、测试耗材配件 
价格：您在为比价发愁? 告诉我们您的可接受价格, 一切皆有可能... 最优价格成交...
维修：仪器机台故障、坏了, 供应商维修报价高。 找我们, 也许很简单就搞定了, 多一个选择 
