下午好!  欢迎浏览本公司网页  专业提供原装测试耗材,价格优惠,欢迎咨询! 瑞士EMPA,德国BAM、VSM,英国James、SDC,美国AATCC、Testfabrics ...
 搜索产品   
   热门搜索:  SATRA 测试相关   Taber 产品   EMPA 产品   BAM 产品
检测仪器设备 测试耗材配件 技术咨询服务   Test Equipments and Test Materials
 【首页】   【产品中心】   【资料中心】   【服务中心】   【联系我们】  业务代表 林S:(0)15820869812, 0769-2201 2232, QQ:195552614, Email: lin@ydtest.com
 
产 品 目 录 (163)
 
产 品 目 录
     
  
  
相关产品(硬度计)

Teclock 硬度计 TM-91R
12-HD TECLOCK TM-91R


各种硬度计维修 校正 调修 校准
19-MC HD-Re


Teclock 硬度计 橡胶硬度计 GS-706N
12-HD GS-706N


Teclock 硬度计 橡胶硬度计 GS-709N
12-HD GS-709N


Teclock 硬度计 橡胶硬度计 GS-702N
12-HD GS-702N

相关资料(硬度计)

=====暂没找到相关文件资料=====
 
      全部产品      硬度计      Asker | e-Asker 日本原装     浏览产品信息:
产品代号: 12-HD Asker F
产品名称: Asker F 硬度计

产品价格: 欢迎询价¥ , 1个 / 个
品牌产地: 日本 Asker
产品规格: Asker F

产品简介: Asker F 适用于 发泡材料 泡棉

更新时间: 2014-3-18
浏览次数: 2466



产品描述:  


Description:

The ASKER Durometer Type F for much softer specimens (low hardness) gives accurate readings as it features a larger indentor and pressure foot.

The durometer exclusively for various foam materials such as urethane foam, sponge, etc.

There is no need to press the durometer into the specimen, but just to place it onto the specimen. As it is soft, the weight of the durometer constitutes the pressure to the specimen.

The pressure foot in contact with a specimen is 80mm in diameter, wide enough to offer a stable measurement by placing it onto the specimen.

Specification
Indication range:0 point - 100 point (262 degree dial scale)
Minimum indication:1 point (Accuracy : ±1 point)
Indentor Design (mm):Height: 2.54,25.2 Dia. Cylindrical
Spring Forces [mN(g)]:0 point: 539(55),100 point: 4460(455)
Central hole of diameter of Pressure foot:Φ26
Pressure foot Dimension (mm):Φ80(Round shape)
Outer Dimension (mm): Approx. Width 80×Depth 80×Height 81
Weight (g): 500
Application: Urethane foam,Sponge,Nonwoven fabric


Type A Durometer (ASKER A type), conforming to JIS K 6235 is the most popular type of durometer for measuring rubber hardness.

However, verification is recommended because a significant difference is estimated to be the largest when a durometer indicates measurement values from 10 to 90 points.

For hard specimens for which Type A Durometer readings indicate more than 90 points, measurements should be undertaken using the Type D Durometer (ASKER D type). However, for soft specimens with measurements of less than 20 points, the ASKER C type or Type E Durometer (ASKER E type) should be used. The most important consideration in using durometers is to select the correct type for purposes of measurement according to the specimen.









 
  • 标准测试耗材:100% 原装产品、价格满意、可时效配合
  • 所有产品资讯:100% 质量过关、跟进改良、可找到所需
  • 所有技术服务:100% 免费咨询、随时解答、可维修校准
  •  产品:您要什么产品? 找我们帮忙。专业提供实验室、检测校准、计量研发所使用仪器、测试耗材配件
  •  价格:您在为比价发愁? 告诉我们您的可接受价格, 一切皆有可能... 最优价格成交...
  •  维修:仪器机台故障、坏了, 供应商维修报价高。 找我们, 也许很简单就搞定了, 多一个选择
  • 电话:+86 (0)769 2201 2232   传真:+86 (0)769 2201 2232    在线QQ:195552614
    广东省东莞市东城区    Email:yd#ydtest.com
    Powered By YDTEST.COM Copyright©   YUDA All Rights Reserved.
       粤ICP备09029704号-1
    Visitors: 1809217-81912282-368

    您当前IP为:44.211.116.163